Nastavení účtu
USA
20:06:37 GMT+0000 (Coordinated Universal Time)
GIL60-UK-2RS
Rod end
Rod end with internal thread, maintenance-free, sliding layer: ELGOGLIDE, DIN ISO 12240-4, dimension series E, type F, inner ring curved surface with hard chromium coating, sealed, left hand thread
Produktové informace
Metrické
Imperiální
Main Dimensions & Performance Data
| Cr | 691.000 N | Basic dynamic load rating, radial |
| C0r | 405.000 N | Basic static load rating, radial |
| d | 60 mm | Bore diameter bearing |
| d2 | 135 mm | Outer eye diameter |
| l4 | 242,5 mm | Total length internal thread head |
| ≈m | 5,58 kg | Hmotnost |
Dimensions
| C1 | 38 mm | Width of the rod end |
| D | 90 mm | Outside diameter bearing |
| B | 44 mm | Width inner ring |
| dK | 80 mm | Ball diameter |
| d3 | M52x3-6H-LH | Thread size |
| d4 | 70 mm | Shank diameter |
| d5 | 88 mm | Shank diameter, large |
| h1 | 175 mm | Shank Length Internal thread head |
| α | 6 ° | Tilt angle |
| l3 | 70 mm | Thread length Internal thread |
| l5 | 20 mm | Length rod end shank |
| l7 | 75 mm | Distance drilling with/shaft start |
| W | 75 mm | Width Across Flat |
| dUT | -0,015 mm | Bore diameter bearing, lower tolerance |
| dT | 0,15 | Bore diameter bearing, tolerance |
| dOT | 0 mm | Bore diameter bearing, upper tolerance |
| BUT | -0,15 mm | Width inner ring, lower tolerance |
| BOT | 0 mm | Width inner ring, upper tolerance |
| Gr | 0 - 0,06 | Radial Clearance |
| Grmin | 0 mm | Radial clearance, minimum |
| Grmax | 0,06 mm | Radial clearance, maximum |
Mounting dimensions
| r1smin | 1 mm | Edge Spacing |
| d1 | 66,8 mm | Outer flange diameter inner ring |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 130 °C | Operating temperature max. |
Stahování:
Vaše aktuální varianta produktu
| Clampable | Not clampable | |
| Maintenance | Maintenance free | |
| Mounting | Internal thread | |
| Slotted | No | |
| Thread Pitch | Left-hand thread | |
| Sealing | 2RS | Lip seals on both sides |
Vlastnosti
