Nastavení účtu
USA
15:10:02 GMT+0000 (Coordinated Universal Time)
HCM7020-EDLR-T-P4S-UL-XL
High speed spindle bearing
High speed spindle bearing HCM70..-EDLR, adjusted, in pairs or sets, contact angle α = 25°, with ceramic balls, restricted tolerances, for direct oil feed via outer ring, with inserted O rings
Produktové informace
Metrické
Imperiální
Main Dimensions & Performance Data
| d | 100 mm | Bore diameter |
| D | 150 mm | Outside diameter |
| B | 24 mm | Width |
| Cr | 41.000 N | Basic dynamic load rating, radial |
| C0r | 29.500 N | Basic static load rating, radial |
| Cur | 2.120 N | Fatigue load limit, radial |
| nG Grease | 16.000 1/min | Limiting speed for grease lubrication |
| nG Oil | 22.000 1/min | Limiting speed for oil lubrication |
| ≈m | 1,2 kg | Hmotnost |
Mounting dimensions
| da | 110 mm | Diameter shaft shoulder |
| da | h12 | Diameter shaft shoulder clearance |
| Da | 141 mm | Shoulder diameter outer ring |
| Da | H12 | Shoulder diameter outer ring clearance |
| ra max | 1,5 mm | Maximum recess radius |
| ra1 max | 0,6 mm | Maximum recess radius |
| BN | 4 mm | Distance ring grooves |
| BN1 | 4 mm | Distance ring grooves |
| SN | 14,5 mm | Distance to lubrication hole |
| SB | 2,2 mm | Width of lubricating groove |
| a | 41,1 mm | Distance between the apexes of the pressure cones |
Dimensions
| rmin | 1,5 mm | Minimum chamfer dimension |
| r1 min | 1 mm | Minimum chamfer dimension |
| α | 25 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 100 °C | Operating temperature max. |
Additional information
| FV L | 345 N | Preload force light |
| FV M | 905 N | Preload force medium |
| FV H | 1.885 N | Preload force heavy |
| KaE L | 991 N | Lift-off force light |
| KaE M | 2.633 N | Lift-off force medium |
| KaE H | 5.578 N | Lift-off force heavy |
| ca L | 215 N/µm | Axial rigidity light |
| ca M | 302 N/µm | Axial rigidity medium |
| ca H | 397 N/µm | Axial rigidity heavy |
Stahování:
Vaše aktuální varianta produktu
| Contact angle | E | Contact angle 25° |
| Lubricant | Without | |
| Sealing | Without | |
| Outer shape | DLR | Direct lubrication, annular slots with O rings |
| Cage | T | Laminated fabric cage |
| Tolerance class | P4S | tolerance class P4S, FAG standard better than P4 to DIN 620 |
| Arrangement bearing set | U | Single bearing |
| Preload | L | preload light |
Vlastnosti
