Nastavení účtu
USA
15:00:42 GMT+0000 (Coordinated Universal Time)
VCM7010-CDLR-T-P4S-UL-XL
High speed spindle bearing
High speed spindle bearing VCM70..-CDLR, adjusted, in pairs or sets, contact angle α = 17°, with ceramic balls, rings made from Vacrodur, restricted tolerances, for direct oil feed via outer ring, with inserted O rings
Produktové informace
Metrické
Imperiální
Main Dimensions & Performance Data
| d | 50 mm | Bore diameter |
| D | 80 mm | Outside diameter |
| B | 16 mm | Width |
| Cr | 31.500 N | Basic dynamic load rating, radial |
| C0r | 9.900 N | Basic static load rating, radial |
| Cur | 500 N | Fatigue load limit, radial |
| nG Grease | 32.000 1/min | Limiting speed for grease lubrication |
| nG Oil | 50.000 1/min | Limiting speed for oil lubrication |
| ≈m | 250 g | Hmotnost |
Mounting dimensions
| da | 56 mm | Diameter shaft shoulder |
| da | h12 | Diameter shaft shoulder clearance |
| Da | 74 mm | Shoulder diameter outer ring |
| Da | H12 | Shoulder diameter outer ring clearance |
| ra max | 1 mm | Maximum recess radius |
| ra1 max | 0,3 mm | Maximum recess radius |
| BN | 2,6 mm | Distance ring grooves |
| BN1 | 2,6 mm | Distance ring grooves |
| SN | 9,3 mm | Distance to lubrication hole |
| SB | 1,4 mm | Width of lubricating groove |
| a | 17,9 mm | Distance between the apexes of the pressure cones |
Dimensions
| rmin | 1 mm | Minimum chamfer dimension |
| r1 min | 0,6 mm | Minimum chamfer dimension |
| α | 17 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 100 °C | Operating temperature max. |
Additional information
| FV L | 49 N | Preload force light |
| FV M | 129 N | Preload force medium |
| FV H | 271 N | Preload force heavy |
| KaE L | 143 N | Lift-off force light |
| KaE M | 384 N | Lift-off force medium |
| KaE H | 825 N | Lift-off force heavy |
| ca L | 45 N/µm | Axial rigidity light |
| ca M | 64 N/µm | Axial rigidity medium |
| ca H | 86 N/µm | Axial rigidity heavy |