Select a different country or region to see content for your location.
United States
17:08:20 GMT+0000 (Coordinated Universal Time)
ZKLN1545-2RS-PE
Axial angular contact ball bearing
Axial angular contact ball bearings ZKLN..-2RS-PE, Increased tolerances, double direction, lip seals on both sides
Replaces
ZKLN 1545.2RS PE
Preferred product
Product information
Main Dimensions & Performance Data
| d | 15 mm | Bore diameter |
0 mm | Bore diameter upper tolerance | |
-0,01 mm | Bore diameter lower tolerance | |
| D | 45 mm | Outside diameter |
0 mm | Outside diameter upper tolerance | |
-0,011 mm | Outside diameter lower tolerance | |
| B | 25 mm | Width |
0 mm | Width upper tolerance | |
-0,25 mm | Width lower tolerance | |
| Ca | 18.000 N | Basic dynamic load rating, axial |
| C0a | 28.500 N | Basic static load rating, axial |
| Cua | 1.300 N | Fatigue load limit, axial |
| nG Grease | 8.200 1/min | Limiting speed for grease lubrication |
| nϑ | 3.500 1/min | Thermally safe operating speed |
| MR | 0,2 Nm | Bearing frictional torque |
| ≈m | 0,219 kg | Weight |
Mounting dimensions
| Da max | 35 mm | Maximum diameter of housing |
| da min | 20 mm | Minimum diameter shaft |
Dimensions
| d1 | 28 mm | Rib diameter inner ring |
| rmin | 0,3 mm | Minimum chamfer dimension |
| r1 min | 0,6 mm | Minimum chamfer dimension |
| α | 60 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| caL | 400 N/µm | Rigidity axial |
| ckL | 65 Nm/mrad | Tilting rigidity |
| Mm | 0,102 kg*cm2 | Mass moment of inertia |
5 µm | Axial runout | |
ZM15 | Recommended INA precision locknut for radial locking | |
AM15 | Recommended INA precision locknut for axial locking | |
| MA | 10 Nm | Tightening torque for the recommended INA precision locknut |
5.484 N | Required locknut force axial |